Logo
   Products  CCTV  Accessories  Cables

Cable MULTI-CAT5GL

Multicable (1 x Ethernet, 3 x 1.5qmm) GL-type approval

Products may differ in size, colour and appearance to those shown. If you require further information or customisation, please contact us directly.

Features

Logo Logo Logo
Type Cable MULTI-CAT5GL
WISKA-Order no. 50103176
Operational areas Outdoor, Indoor
Temp. range min -25 °C
Temp. range max 80 °C
Material Thermoplastic Copolymer
Advice hard wiring only
Voltage 300 V
Remarks:

WISKA CCTV multi-cable type MULTI-CAT5GL
Type approval by Germanischer Lloyd
includes power (3 x 1.5mm²) and
Ethernet (CAT5e)

Weight: 0,27kg/m

For outdoor and indoor use

Wire LIH 1.5/2.8 (Power)
Stranded bare copper wire 19 X 0.32 (16 AWG):
ø 1.6 mm (0,063 in)
Insulation of Thermoplastic copolymer (FRNC):
ø 2.8 mm (0,110 in)
Wall thickness: about 0.6 mm

Wire 9Y(ST)CH 4X2X0.6/1.2-100 LI (Cat.5)
Wire
Stranded bare copper wire 7 X 0.2 (24 AWG):
ø 0.6 mm (0,024 in)
Insulation of Polypropylene:
ø 1.2 mm (0,047 in)
2 wires twisted to a pair

4 pairs twisted + fillers
Sequence of colors:
WHBU/BU-WHOG/OG-WHGN/GN-WHBN/BN
Plastic tape, overlapped
Alulaminate foil overlapped
Shield braiding of tinned copper wires:
0.13 mm dia (36 AWG)
Coverage about 85%: ø 5.8 mm (0,228 in)
Jacket:
Thermoplastic copolymer (FRNC) BK
Wall thickness about 0.5 mm:
ø (6.8 ±0.2) mm (0,268 ±0,008 in)

Core:
1 unit: 9Y(ST)CH 4X2X0.6/1.2-100 LI (Cat.5)
3 wires + fillers: LIH 1.5/2.8 (Power) BN-BU-YEGN
Plastic tape, overlapped
Shield braiding of tinned copper wires 0.2 mm dia (32 AWG)
Coverage about 85%: ø 10.9 mm (0,429 in)

Jacket:
Thermoplastic copolymer (FRNC) BK: ø (12.5 ±0.3) mm (0,492 ±0,012 in)
Wall thickness about 0.8 mm:
WISKA CCTV MULTI CAT5 GL "internal lot number"
Printing: "sequential length in metres"

Electrical data at 20°C
Wire LIH 1.5/2.8 (Power)
Conductor resistance: ≤ 14 Ohm/km
Insulation resistance: ≥ 20 MOhm*km
Operating voltage (peak): ≤ 300 V
Test voltage
(wire/wire/screen rms 50Hz 1min): 1000 V

9Y(ST)C 4X2X0.6/1.2-100 LI (Cat5)
Loop resistance: ≤ 180 Ohm/km
Insulation resistance: ≥ 5 GOhm*km
Signal run time: ≤ 5.3 ns/m
Capacitance (1 kHz): ≈ 57 nF/km
Characteristic impedance 100 MHz: (100 ± 5) Ohm
Surface transfer impedance 10 MHz: ≤ 100 mOhm/m
Operating voltage: 100 V
Test voltage (wire/wire/screen rms 50Hz 1min):
1000 V

Frequency (MHz) 1 4 10 16 20 31.25 62.5 100
Next (dB) 65.3 56.3 50.3 47.2 45.8 42.9 38.4 35.3
PSNext (dB) 62.3 53.3 47.3 44.2 42.8 39.9 35.4 32.3
ELFext (dB) 63.8 51.8 43.8 39.7 37.8 33.9 27.9 23.8
PSELfext (dB) 60.8 48.8 40.8 36.7 34.8 30.9 24.9 20.8
Attenuation
typ.(dB/100m) 2.1 4.0 6.3 8.0 9.0 11.4 16.5 21.3

Frequency 4 8 10 16 20 31.25 62.5 100
Return
loss (dB) 23.0 24.5 25 25 25 23.6 21.5 20.1

Mechanical and thermal characteristics
Conductor material acc. to DIN EN 13602 Cu-ETP-A...
Screen material acc. to DIN EN 13602 Cu-ETP-A...-B
Insulating material acc. to DIN EN 50290-2-25, compound type full PP (HD 624.5)
Insulating material acc. to DIN EN 50290-2-26 (VDE 0819) (HD 624.6)
Jacket material acc. to IEC 60092-359 / SHF1
Flame retardant acc. to IEC 60332-3-22 (Cat. A)

Other characteristics:

"RoHS compliant (Directive 2002/95/EC)
Halogen free, UV-resistant
GL-type approval: Certificate-No.: 75481-09HH
Permissible temperature range : -25°C (-13°F) up to 80°C (176°F)
Min. bending radius allowed : repeated 10X ø, single 5X ø
Weight about : 234 kg/km (157 lb/1000ft)

forgot password?

Downloads | Contact | Imprint | T&C | Privacy Policy | Sitemap | Press Releases | login | Print page
Stand: 19.09.2019 20:09:00